Outdoor Upgraded 28 LEDs Solar Powered Motion Sensor Security Lights [4-Pack]
Please Kindly Take a Time to Read Our TIPS:
Please active the light with the key pin. Once to turn on the solar light, twice to turn off the light.
Peel the protective film.
Make sure the solar light be fully charged under directly sunlight in 1-2 days.
Test the solar light by covering the solar panel with your palm
If it is on, please install it to a place where can get sufficient direct sunlight.
If not, please turn off and turn on it again and fully charged with sunlight for 1-2 days.
The internal battery is locked from factory for safety shipment, so users have to use supplied Key pin to click the "on/off" Switch hole and unlock the battery and lighting system,then please use the supplied expansion pillar-hinge and screws to mount the device on wall or anywhere outside you want for lighting.
Solar Powered and Energy Saving
Please install the unit face south and make sure the solar panel can get the good sunlight directly without any shelter or glass. Normally it can be fully charged in one day under ideal bright sunlight.
Night Sensor&Motion Sensor
Equipped with PIR motion sensor,when movement detected around 10ft and 120 degrees,the light will turn on automatically for about 30s.
No Dim Mode for Long Serive Life
When motioin is beyond the detection,the light is turn off automatically.
Solar panel: 0.55W
Li-ion battery: 3.7V 1200mAh
LED power: 0.2W, 6000K-6500K,28PCS, 24-26lm/PCS, 400lm
Motion angle and distance: 120 degrees, 10ft
Weight: 6.77 ounces
Size: 5.1*4.3*2.7 inches
Working mode: Automatically turn on when motion detected and turn off after lighting on around 30 seconds.
Package Content Per Box
4 x Solar Motion Sensor Light
8 x Expansion Pillar-hinge
8 x Installing Screws
2 x key pin
1 x Manual