Search

WiFi Smart Bulb, B22 Bayonet 9W Smart Led Bulb Compatible with Alexa, Google Home and IFTTT, Dimmable RGB Smart Light Bulb, No Hub Required, 60W Equivalent Remote Controlled 2 Pack

  • REMOTE CONTROL
  • MULTI COMPATIBILITY
  • SMART GROUP & TIMING CONTROLS
  • DIMMABLE LIGHT& DIFFERENT SCENSE
  • SIMPLY SETUP & EASY INSTALLATION
£35.94
i h

Product Description
Easy to Connect with Smart Life App
Please make sure the WiFi router seted to 2.4Ghz already before connecting.

Please set your internet to compatible mode if your WiFi router support 2.4Ghz and 5Ghz.

How to make the smart bulb flash rapidly?(EZ mode)

1.Connect the bulb to the power source.

2.Press the switch"on-off-on-off-on"continuously(Keep time interval not too short, turn off after the light is on).

3.Then the smart bulb will be flashing quickly.

Go on with Confirm light blinks rapidly.

How to make the smart bulb flash slowly?(AP mode)

1.Power on device, power off after 10s then power on again.

2.Turn on-off-on-off-on continuously.

3.When the bulb is flashing rapidly now, go to next step.

4.Operate again: On-off-on-off-on, then the bulb will be flashing slowly.

Go on with Confirm light blinks rapidly and connect with 2.4Ghz wifi.

Control Your Light from Anywhere
Connect and control your WiFi smart light bulbs from anywhere in the world, as long as internet access is available. It only takes seconds for smart bulbs connect to your home WiFi through Smart Life app.

A secured 2.4 GHz Wi-Fi network connection is required. You can always make sure your lighting set the way you desire from anywhere.

Know about Smart Life APP
Step 1: Search "Smart Life" on Phone or Scan the QR code on User Manual to download it.

Step 2: Connect the bulb to your local 2.4G WIFI with your phone connecting to it.

Step 3: Set up your Smart Life account. Add Device>Lighting devices and confirm the device in the App.

Step 4: Easy Mode or AP Mode(Press on/off button of the switch 3 times)

App Connection Tips
Be sure that you are using 2.4GHz WiFi when connecting with the smart bulb. And WiFi must be detectable status. Many routers have 5 GHz and 2.4 GHz network and your phone will always automatically connect to the 5 GHz network. So you have to completely turn off your 5 GHz network by going to your router settings (enter the router IP address into your internet browser, usually something like 192.168.1.1), forcing your phone to connect to the 2.4 GHz network.

In addition, the router encryption mode must be WPA2-PSK type and the authentication type must be AES.

Tips -- Voice Control Via Alexa
Cannot voice control?

Please name the smart bulb without Arabic numerals or special characters, it is better to name the smart bulb with the names which is easy to understand.

Disconnect?

Please check whether the Wi-Fi network is still 2.4GHz.

Voice Control
Works great with Alexa Echo and Google Home, control this smart bulb with your voice.

Using your voice, control your smart bulb and change the colors depending on your mood. With over 16 Million colours to choose from.

0.0 0
Write your own review Close
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*

Product Description
Easy to Connect with Smart Life App
Please make sure the WiFi router seted to 2.4Ghz already before connecting.

Please set your internet to compatible mode if your WiFi router support 2.4Ghz and 5Ghz.

How to make the smart bulb flash rapidly?(EZ mode)

1.Connect the bulb to the power source.

2.Press the switch"on-off-on-off-on"continuously(Keep time interval not too short, turn off after the light is on).

3.Then the smart bulb will be flashing quickly.

Go on with Confirm light blinks rapidly.

How to make the smart bulb flash slowly?(AP mode)

1.Power on device, power off after 10s then power on again.

2.Turn on-off-on-off-on continuously.

3.When the bulb is flashing rapidly now, go to next step.

4.Operate again: On-off-on-off-on, then the bulb will be flashing slowly.

Go on with Confirm light blinks rapidly and connect with 2.4Ghz wifi.

Control Your Light from Anywhere
Connect and control your WiFi smart light bulbs from anywhere in the world, as long as internet access is available. It only takes seconds for smart bulbs connect to your home WiFi through Smart Life app.

A secured 2.4 GHz Wi-Fi network connection is required. You can always make sure your lighting set the way you desire from anywhere.

Know about Smart Life APP
Step 1: Search "Smart Life" on Phone or Scan the QR code on User Manual to download it.

Step 2: Connect the bulb to your local 2.4G WIFI with your phone connecting to it.

Step 3: Set up your Smart Life account. Add Device>Lighting devices and confirm the device in the App.

Step 4: Easy Mode or AP Mode(Press on/off button of the switch 3 times)

App Connection Tips
Be sure that you are using 2.4GHz WiFi when connecting with the smart bulb. And WiFi must be detectable status. Many routers have 5 GHz and 2.4 GHz network and your phone will always automatically connect to the 5 GHz network. So you have to completely turn off your 5 GHz network by going to your router settings (enter the router IP address into your internet browser, usually something like 192.168.1.1), forcing your phone to connect to the 2.4 GHz network.

In addition, the router encryption mode must be WPA2-PSK type and the authentication type must be AES.

Tips -- Voice Control Via Alexa
Cannot voice control?

Please name the smart bulb without Arabic numerals or special characters, it is better to name the smart bulb with the names which is easy to understand.

Disconnect?

Please check whether the Wi-Fi network is still 2.4GHz.

Voice Control
Works great with Alexa Echo and Google Home, control this smart bulb with your voice.

Using your voice, control your smart bulb and change the colors depending on your mood. With over 16 Million colours to choose from.

Product tags